Go to global navigation

Read the article

Go to local navigation

Go to footer



Freezing and Thawing Apparatus (B method: freezing and thawing in water)



Outline of Product Technology

Product number: MIT-682-3-01

A freezing and thawing apparatus for building material.

This testing apparatus has two-layer (upper and lower) structure to alternately repeat freezing and thawing of specimens automatically with "freezing in air and thawing in water (B method)" based on testing standards. The upper and lower layer of the testing chamber and water chamber reduces the heat loss in the constant temperature water circulation when "thawing" and also reduces the electric power for pump. The water chamber has a lid that opens upward and is easily maintained and the lid can be a foot stool. The cold air circulation fan is motor-separated type and it is also easily maintained.

Product Outline

Features

  • Large touch panel that allows easy operation and checking
  • "Self error detection" to deal with troubles
  • Direct circulation provides even temperature distribution and saves energy

Specifications

Standards JIS A 1435 / JIS A 5422 /JIS A 5423 /JIS A 5208 /JIS A 5209
Applicable specimen size 70 x 150 x T 15 mm (changeable)
Type B method:freezing in air and thawing in water
Operation screen 10 inch color grapfic touch panel
Control program Freezing and thawing by temperature/freezing and thawing by time
Function/Display Operating instructions, help/total number of cycles,remaining number of cycles
Self error detection Error part indication/Solution indication/Determination of the point of electricity leaks (electricity leakage check function)
Air temp. in testing chamber −30℃ 〜 +40℃ ±1℃
Water temp. in testing tank +5℃ 〜 +40℃ ±2℃
Internal dimensions of testing chamber W 900 x D 400 x H 440 mm
External dimensions W 1660 x D 1420 x H 1545 mm
Test item Temperature cycle/Time cycle
Heater 6 kW(for water)/ 5 kW(for air)
Freezer outside installation : 2.2 kW
Power source Three-phase 200V 50A
Accessories Foot stool

Detailed Information

arge touch panel that allows easy operation and checking

A large color touch panel (10 in.) provides easy operation and setting.
Pressing the "Preliminary operation" button you can confirm how to set specimens and make test settings.
It also enables efficient management of the test as you can check the test status (time passage, temperature of testing chamber, temperature of testing tank, remaining number of cycles, total number of cycles, and test ending time) immediately.

You can see the operating instructions using the touch panel when you have a trouble.

Direct circulation provides even temperature distribution and saves energy

MARUI products use the "direct circulation" system with less heat loss and even temperature distribution.
In "freezing" cycle, it circulates cool air with the cooler and fan equipped on the testing chamber.
In "thawing" cycle, it circulates constant temperature water in the water chamber equipped right under the testing chamber and does not lose heat during circulation.
Warm water "naturally drops" from the testing chamber into the water chamber, and the energy for the circulation is saved.

The original design that makes maintenance easy

The water chamber has a lid that opens upward and is easily cleaned and maintained. The lid can also be a foot stool.
The fan for cool air circulation has an external motor to reduce deterioration and simplify maintenance. The fan in the testing chamber can be replaced separately when damaged and is cost-saving.

"Test time reservation function" for efficient testing plan

MARUI's freezing and thawing apparatus (with touch panels) have built-in "reservation function" to reserve the starting date and time for the test.
This function help you make efficient testing plan such as starting on a holiday.

"Self error detection" to deal with troubles

In case any trouble happens, the touch panel indicates the part in trouble, causes, and solutions, so that you can deal with the troubles quickly.
An electric leak is also checked and detected automatically, and indicated by the specific part.

  1. Home
  2.  >  Product Line
  3.  >  BUILDING MATERIAL
  4.  >  BUILDING MATERIAL : FREEZING AND THAWING
  5.  >  Freezing and Thawing Apparatus (B method: freezing and thawing in water)

Contact us

#Request a Quotation #Inquire about
Product Specifications
#Arrange a Meeting
Whether you have specific challenges or are still in the conceptual stage, please feel free to contact us.
Our experienced sales team will be happy to discuss your requirements.
We can also help you design and manufacture custom products.
We can also manufacture your own test equipment, so please do not hesitate to consult with us.
TOP